NG Systems Pinger
[IPS1]

£229.00 ex vat
£269.08 inc vat


Quantity:

The NG Systems PINGER is a portable hand-held instrument designed for engineers involved in the installation and/or maintenance of IP-based CCTV camera systems. It will interrogate a local area network (LAN) and report on all active cameras found, displaying their Make, Model, MAC address, IP address and Port Number (if available), on its backlit, 80 character LCD display. In addition, camera IP addresses, subnet and gateway may be configured, and PTZ functions (where applicable) tested. Full Description

related products

NG Systems PoE / Data Splitter

£38.00 ex vat
£44.65 inc vat

Full Description

PINGER saves valuable on-site time:
• No need to wait for the operating system to boot up, PINGER’s firmware kicks in as soon as it is switched on.
• No need to find a convenient mains power point, PINGER’s built-in Lithium-Ion battery lasts for up to 8 hours on a full charge and can be quickly re-charged from any USB port or from the AC adaptor (supplied).
• No need to locate, load and run individual camera manufacturers detection and configuration software, PINGER is preloaded for detection and configuration of most major brands. (Firmware upgrades available over the internet as new brands are added).
• No need to check for availability of PoE on Ethernet ports, PINGER provides an immediate LED indication and displays PoE voltage and mode.
• No need to perform a factory reset on cameras, with unknown IP addresses/ports, PINGER will find the information for you.
• No need to access CCTV workstations to test PTZ functionality, PINGER allows you to test each function individually from anywhere on the network or directly on the camera.

Available Functions:

1. Camera Finder Search a LAN and display a list of all IP cameras found, detailing their Model Number, IP address, Port (if available) and MAC address. The search may also be confined to specific camera manufacturers.
2. Assign Assign a specific IP address, subnet mask, gateway to a discovered camera
3. Ping Issue a PING broadcast to a specified IP address and time the response.
4. IP Scanner Scan a LAN and produce a list of all responsive IP addresses within a (specified) IP range.
5. Port Scanner Find all open TCP ports at a specific IP address.
6. UPnP Discovery Search the LAN for all UPnP responsive devices such as PCs, printers etc, displaying information from these devices where available.
7. SNMP Discovery Search the LAN for all SNMP responsive devices displaying information from these devices where available.
8. PoE Analysis Provide an immediate indication of the presence of PoE on the front panel LED and display the PoE voltage and mode on the LCD display.
9. PTZ Test Test Pan, Tilt and Zoom functions on specific IP address.
10. Gateway Test Check for Internet connectivity.
11. DHCP/Fixed IP PINGER can be configured for DHCP if available, or user-defined fixed IP addressing.

* New Upgrade PINGER will allow fine adjustment of overall focus of a IP camera. See it in action in the video below!

Currently viewing: NG Systems Pinger - netcamstore.com

NG Systems Pinger[IPS1]

Available Functions:

Thermal Imaging Cameras now available at NetCamStore!

NG Systems Pinger
[IPS1]